Sizing Chart

by Sahil Bhardwaj

Steps and Risers

Finish: Top Natural, Bottom Natural or Calibrated, Edges Sawn or Rock Face (Hand Dressed)

Sizes:

  • Standard Length: 48″, 60″ , 72″ , 84″ and 96″
  • Standard Width: 16″

Thickness: 6″ or 7″

Paving 

Specifications
Top Finish: Natural, Brushed, Tumbled, Shotblasted/Sandblasted, Flamed
Bottom Finish: Natural or Calibrated
Edge Finish: Hand Dressed or Sawn
Dimensions:
60 series: 600x900,600x600,600x450,600x300,600x290,300x300,290x290 (sizes in mm)
56 series: 560x840, 560x560, 560x420, 560x275, 275x275 (sizes in mm)
Thickness:
Natural Bottom Finish: 15-25mm
Calibrated Bottom Finish: 18mm|20mm|22mm|25mm|30mm
(Please allow a tolerance of +/- 2mm)
*Custom Sizes and thickness available upon request.

 

Cobbles/Setts

Cobble Stones or setts can be used as path edgings, walkways or the most common use is to use cobbles for the entire driveway area. Natural split stones are the perfect choice to make cobble stone driveways and six side sawn stones can be used to create more precise geometric and contemporary looking driveways.

Specifications
  • Top Finish: Natural or Sawn
  • Bottom Finish: Natural or sawn
  • Edge Finish: Hand-dressed or Sawn edges
  • Dimensions: 100x100, 140x140, 200x100, 200x100 (sizes in mm)
  • Thickness: 30-50, 40-60, 60-80, 90-110 (sizes in mm)
  • *Custom Sizes and thickness available upon request.

Jumbo Slabs

Jumbo Slabs are used as Barbecue slabs, exterior countertops, protective covering for wall copings, exterior kitchen or any other exterior design or landscaping project.

Our natural stone Jumbo Slabs are available in natural top, calibrated or natural bottom and hand dressed edges.

Specifications
  • Top Finish: Natural
  • Bottom Finish: Natural or Calibrated
  • Edge Finish: Hand-dressed
  • Dimensions: 48’’x24’’, 60’’x24’’, 72’’x24’’, 72’’x36’’, 72x48’’ (sizes in inches)
  • Thickness: 2’’ or 50mm calibrated
  • *Custom Sizes and thickness available upon request.

Pier Caps

Pier Caps or Pillar Caps add a natural touch and complete the look of your pillars or columns. A Pier cap serves both as crowing piece of a pillar as well as protects your pillars from damaging weather conditions.

Specifications
  • Top Finish: Natural
  • Bottom Finish: Natural or Calibrated
  • Edge Finish: Hand-dressed or Sawn
  • Dimensions: 20’’x20’’, 24’’x24’’, 28’’x28’’, 30’’x30’’ (sizes in inches)
  • Thickness: 2’’/3’’ or 50mm/75mm calibrated
  • *Custom Sizes and thickness available upon request.

Circles

A stone circle adds a distinctive feature to your garden or patio project and gives a soothing look. Natural stone circles enhance the beauty of your outdoor or indoor design projects.

Specifications
  • Top Finish: Natural
  • Bottom Finish: Natural or Calibrated
  • Edge Finish: Hand-dressed
  • Dimensions: 2.4m diameter kit
  • 2.7m diameter kit with squaring off (corners)
  • 3.3m diameter kit
  • 3.6m diameter kit with squaring off (corners)
  • Thickness: 15-25mm or 22mm Calibrated
  • *Custom Sizes and thickness available upon request.

Bull Nosed Products

Our range of bull nosed products includes fire place hearths, kitchen slabs, steps, stair treads and pool copings. Bull nosed edges give a contemporary look to these products and add to the architectural appearance.

Specifications
  • Top Finish: Natural or sawn
  • Bottom Finish: Sawn or Calibrated
  • Edge Finish: Sawn and Bull nosed
  • Dimensions: As per order.
  • Thickness: 30mm/45mm/50mm Calibrated
  • *Custom Sizes and thickness available upon request.

Custom Fabrication

We understand that each landscaping project has its own unique requirements and may not match with our standard sizes and specifications. Please fill up the form under our ‘Contact us’ section and provide us with as much detail as possible about your landscaping project.

We will do our best to meet your expectations and help you get the desired accuracy with all its natural charm.

Back to News